Kabelgebundene Werkzeuge
Werkzeuge, Ersatzteile & Verbrauchsmaterialien:
Kabelgebundene Werkzeuge
TRUMPF TruTool C 250 with chip clipper
The most powerful slitting shears. You can use the chip clipper with just one hand to cut chips at any location. Ideal for interior cutouts and notches.
Maximum sheet thicknesses
- steel 400 N/mm² - 2.5 mm
- steel 600 N/mm² - 1.5 mm
- aluminium up to 250 N/mm² - 3 mm
- spiral duct steel 400 N/mm² - 4 x 0.9 mm
- spiral duct steel 600 N/mm² - 4 x 0.6 mm
Maximum sheet thicknesses
- steel 400 N/mm² - 2.5 mm
- steel 600 N/mm² - 1.5 mm
- aluminium up to 250 N/mm² - 3 mm
- spiral duct steel 400 N/mm² - 4 x 0.9 mm
- spiral duct steel 600 N/mm² - 4 x 0.6 mm
Kabelgebundene Werkzeuge
TRUMPF TruTool S 450 sheet metal cutters
Sheet metal cutters with unbeatable performance. With the cutter height adjustment you can achieve the perfect setting for every application and sheet thickness.
Kabelgebundene Werkzeuge
TRUMPF TruTool N 200
The extremely maneuverable nibbler can be turned on a dime. Perfect for interior cutouts and notches in flat and corrugated sheet.
Kabelgebundene Werkzeuge
TRUMPF TruTool N 350
Compact and handy sheet nibbler in the mid power range. The machine can be turned on the spot. Perfect for interior cutouts and notches.
Kabelgebundene Werkzeuge
TRUMPF TruTool N 500
The compact dismantling nibbler enables you to nibble in 4 cutting directions. Ideal for hard-to-reach areas and cuts across edges.
Kabelgebundene Werkzeuge
TRUMPF TruTool N 700
You can work without feed force, with minimal effort, and in four cutting directions. The dismantling nibbler is perfect for cuts across edges and welding seams.
Kabelgebundene Werkzeuge
TRUMPF TruTool PN 200
The profiling nibbler with short tool is designed for profile depths of up to 3.35 in. You can adjust the direction of processing in 8 cutting directions.
Kabelgebundene Werkzeuge
TRUMPF TruTool PN 201
The profile nibbler with long tool is the ideal choice if you process profile depths of up to 6.4 in. The processing direction can be set in 8 cutting directions.
Kabelgebundene Werkzeuge
TRUMPF TruTool F 300
You can use the TruTool F 300 seam locker to work in sheet thicknesses of 0.03 - 0.05 in mild steel and lock straight as well as curved ducts.